Tuesday, December 1, 2015
Samsung SGH-M919 IMEI Repair and Unlock Solution With Octopus Box
Samsung SGH-M919 IMEI Repair and Unlock Success With Octopus Box
Welcome to Octoplus/Octopus Box Samsung software version 1.7.7
-----------------------------------------------------------------------------------
To connect GT-I8262 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Go to dial window.
11. Enter "*#9090#" number.
12. Set "Diag config" to "USB" value.
13. Restart phone.
14. Press "Read Info" in software.
-----------------------------------------------------------------------------------
To connect SGH-M919 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Go to dial window.
11. Enter "*#9090#" number.
12. Set "Diag config" to "USB" value.
13. Restart phone.
14. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SGH-M919
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM69
Mode: Normal
Phone model: SGH-M919
Firmware compiled date:
Firmware compiled time:
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM69
Selected model: SGH-M919
Mode: Normal
Phone model: SGH-M919
Firmware compiled date:
Firmware compiled time:
Firmware released date: -ù~
Firmware released time:
SW version:
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM69
Selected model: SGH-M919
Please, press "OK" button on the phone to allow USB debugging..
Please, press "OK" button on the phone to allow USB debugging..
Detected phone model: SGH-M919
Firmware compiled date: Wed Aug 27 21:41:58 KST 2014
PDA version: M919UVUFNH7
CSC version: M919TMBFNH7
SW version: M919UVUFNH7
Phone IMEI: Unknown
Phone SN: 00000000000
Android version: 4.4.4 (KTU84P)
Cheking Root
Phone is Rooted
Reading security backup, please wait...
Backup saved as C:\Program Files\Octoplus\Octoplus_Samsung
\BACKUP\Security-SGH-M919-02-12-2014_23-15-10-.asec file
Deactivating MSL...
MSL deactivate successfully
Phone will restart now
After phone being rebooted and powered on perform the following
steps:
1. Disconnect USB cable.
2. Wait 1-2 minutes.
3. Connect phone via UART cable to Box.
Connecting to phone, please wait...
Found phone on COM15
Phone connected successfully
Writing new phone IMEI...
IMEI successfully repaired.
To finish the operation, please restart the phone via phone's menu
(don't disconnect the battery!)
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM15
Selected model: SGH-M919
Detected phone model: SGH-M919
Firmware compiled date: Wed Aug 27 21:41:58 KST 2014
PDA version: M919UVUFNH7
CSC version: M919TMBFNH7
SW version: M919UVUFNH7
Phone IMEI: 352145802547817
Phone SN: 00000000000
Android version: 4.4.4 (KTU84P)
Cheking Root
Phone is Rooted
Reading security backup, please wait...
Backup saved as C:\Program Files\Octoplus\Octoplus_Samsung
\BACKUP\Security-SGH-M919-352145802547817-02-12-2014_23-19-
07-.asec file
Deactivating MSL...
MSL deactivate successfully
Phone will restart now
After phone being rebooted and powered on perform the following
steps:
1. Disconnect USB cable.
2. Wait 1-2 minutes.
3. Connect phone via UART cable to Box.
Connecting to phone, please wait...
Found phone on COM15
Phone connected successfully
Writing new phone IMEI...
Phone is successfully unlocked
To finish the operation, please restart the phone via phone's menu
(don't disconnect the battery!)
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment