Showing posts with label FLASHING. Show all posts
Showing posts with label FLASHING. Show all posts
Saturday, December 5, 2015
Lenovo A319 Firmware Download Link
I want to share today where you can download the exact working firmware of this phone from Lenovo which is called Lenovo A319.
This firmware is you can use it to fix your Lenovo A319 to this following problem....
1.Hang in logo
2.Rebooting
3.Bootloop
4.Dead Phone But detected in PC.
Download the firmware here
Note:You must have an account to that site in order to download that firmware.
Follow this procedures to flash your phone using SP Flash Tools>http://www.blpu.blogspot.com/2015/06/o-838-firmware-download-link.html
For Invalid IMEI:
This firmware is you can use it to fix your Lenovo A319 to this following problem....
1.Hang in logo
2.Rebooting
3.Bootloop
4.Dead Phone But detected in PC.
Download the firmware here
Note:You must have an account to that site in order to download that firmware.
Follow this procedures to flash your phone using SP Flash Tools>http://www.blpu.blogspot.com/2015/06/o-838-firmware-download-link.html
For Invalid IMEI:
Your Phone/Tablet must be rooted first
Restore yong IMEI in MTKDroidTools version 2.5.3. You will have this error when you format your phone in Flashtool as I had experienced. To restore download MTKDroidTools version 2.5.3 After you extract the file. Open the green robot, you must enable the usb debugging in your phone. It is usually located in Settings>Devoloper Mode then look for usb debugging. After enabling it. Connect your phone in your computer then in MTKDroidTool click on ROOT. Wait for it to finish, then Click in IMEI/NVRAM, input 15 number in each box. Then click REPLACE. Then click Reboot or you can manually turn off your phone. Then turn your phone on again. You can see that you have fully restored your IMEI.
Don't Forget to like us on Facebook and Follow us on Google+
How To Flash or Update SM-G355H using Odin
Below is the Procedures How To Flash or Update SM-G355H using odin.
Extract Odin ZIP file
Open Odin v.3.10.6
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
Do the Flashing of new Firmware if you have experienced this following Problem.
*Hangs
*Hangs in Logo
*Freezes
*Force Close
*or Just want to Update to the latest Android Version of your phone.
Extract Odin ZIP file
Open Odin v.3.10.6
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
Starmobile Roar Firmware Download Link
Here's The firmware of Starmobile Roar which you will need if you have encounter software problems like Hang in logo,Rebooting,Bootloop and Dead Phone But detected in PC.Download all files below and use extractor zip software to extract the files and put in one folder in desktop to easy navigation in your PC.
Download:
Download:
Starmobile Roar Firmware
VCom Drivers
Drivers Auto Installer
Sp Flash Tools
Sp Flash Tools
After finish downloading all files put in one folder in desktop to easily navigate the files.
If you using Window 7 OS
Connect your phone in PC using Micro USB Cable in turn-off mode and open Drivers Auto Installer and run the install-window batch file.Like shown in the image.
3. If the driver is successfully installed MediaTek DA USB VCOM will appear in the New Hardware Wizard.
Drivers Auto Installer
Sp Flash Tools
Sp Flash Tools
After finish downloading all files put in one folder in desktop to easily navigate the files.
Installing Drivers
First thing first,Before you can flash/install rom in your phone you must secure first that your phone is detected in your PC.If you using Window 7 OS
Connect your phone in PC using Micro USB Cable in turn-off mode and open Drivers Auto Installer and run the install-window batch file.Like shown in the image.
The drivers will automatically installed in your PC.
If You using Window XP
Connect your phone in PC using Micro USB Cable in turn-off mode while pressing Volume Up or Volume Down.This will detect and look for the driver.
1. This is the first time that you will connect your phone and it will search for the correct driver.
2. Check include this location ... ... and click on browse. Look for USB VCOM Driver and Click on 2K_XP_COM folder if you are using Windows XP or Win7 for Windows 7 and then press OK when you are done picking the right folder for the driver.
Flashing/Install new Firmware/Stock ROM
1.Open Sp Flash tool
2.Click Scatter-loading and browse for MT6582_Android_scatter
3.Now,check all box and manually add all files and connect your phone while turn-off mode
4.When successfully connected the progress bar will run and change it colors and wait until you dialog window saying Download Ok.
Some workarounds:
If you encounter PMT_Changed error here is what you do:
In Older Version of FlashTool
Load the scatter file
Click in Format (a new menu will popup)
Make sure that you select Format whole flash except bootloader then press OK
Connect your phone in bootmode (Turn off your device then hold Volume UP or VOLUME DOWN then insert USB)
It should detect your phone and continue to flash.
Then Click Download to fully flash your phone.
Hard Reset your phone after flashing.
In Latest version of Flashtool
Load the scatter file
Choose Format + Download (Underneath Scatter-loading file)
Then Click Download and wait until it is done flashing
For Invalid IMEI:
Your Phone/Tablet must be rooted first
Restore yong IMEI in MTKDroidTools version 2.5.3. You will have this error when you format your phone in Flashtool as I had experienced. To restore download MTKDroidTools version 2.5.3 After you extract the file. Open the green robot, you must enable the usb debugging in your phone. It is usually located in Settings>Devoloper Mode then look for usb debugging. After enabling it. Connect your phone in your computer then in MTKDroidTool click on ROOT. Wait for it to finish, then Click in IMEI/NVRAM, input 15 number in each box. Then click REPLACE. Then click Reboot or you can manually turn off your phone. Then turn your phone on again. You can see that you have fully restored your IMEI.
Some workarounds:
If you encounter PMT_Changed error here is what you do:
In Older Version of FlashTool
Load the scatter file
Click in Format (a new menu will popup)
Make sure that you select Format whole flash except bootloader then press OK
Connect your phone in bootmode (Turn off your device then hold Volume UP or VOLUME DOWN then insert USB)
It should detect your phone and continue to flash.
Then Click Download to fully flash your phone.
Hard Reset your phone after flashing.
In Latest version of Flashtool
Load the scatter file
Choose Format + Download (Underneath Scatter-loading file)
Then Click Download and wait until it is done flashing
For Invalid IMEI:
Your Phone/Tablet must be rooted first
Restore yong IMEI in MTKDroidTools version 2.5.3. You will have this error when you format your phone in Flashtool as I had experienced. To restore download MTKDroidTools version 2.5.3 After you extract the file. Open the green robot, you must enable the usb debugging in your phone. It is usually located in Settings>Devoloper Mode then look for usb debugging. After enabling it. Connect your phone in your computer then in MTKDroidTool click on ROOT. Wait for it to finish, then Click in IMEI/NVRAM, input 15 number in each box. Then click REPLACE. Then click Reboot or you can manually turn off your phone. Then turn your phone on again. You can see that you have fully restored your IMEI.
Cherry Mobile Flare Lite Firmware Download Link
You need this firmware/stock rom if you have encountered this kind of problem in your phone.Listed Below
1.Hang in logo
2.Rebooting
3.Bootloop
4.Dead Phone But detected in PC
1.Hang in logo
2.Rebooting
3.Bootloop
4.Dead Phone But detected in PC
Downloads:
VCom Drivers
Drivers Auto Installer
Sp Flash Tools
Sp Flash Tools
After finish downloading all files put in one folder in desktop to easily navigate the files.
If you using Window 7 OS
Connect your phone in PC using Micro USB Cable in turn-off mode and open Drivers Auto Installer and run the install-window batch file.Like shown in the image.
3. If the driver is successfully installed MediaTek DA USB VCOM will appear in the New Hardware Wizard.
Drivers Auto Installer
Sp Flash Tools
Sp Flash Tools
After finish downloading all files put in one folder in desktop to easily navigate the files.
Installing Drivers
First thing first,Before you can flash/install rom in your phone you must secure first that your phone is detected in your PC.If you using Window 7 OS
Connect your phone in PC using Micro USB Cable in turn-off mode and open Drivers Auto Installer and run the install-window batch file.Like shown in the image.
The drivers will automatically installed in your PC.
If You using Window XP
Connect your phone in PC using Micro USB Cable in turn-off mode while pressing Volume Up or Volume Down.This will detect and look for the driver.
1. This is the first time that you will connect your phone and it will search for the correct driver.
2. Check include this location ... ... and click on browse. Look for USB VCOM Driver and Click on 2K_XP_COM folder if you are using Windows XP or Win7 for Windows 7 and then press OK when you are done picking the right folder for the driver.
Flashing/Install new Firmware/Stock ROM
1.Open Sp Flash tool
2.Click Scatter-loading and browse for MT6572_Android_scatter
3.Now,Click Download and connect your phone while power off.
4.When successfully connected the progress bar will run and change it colors and wait until you dialog window saying Download Ok.
Some workarounds:
If you encounter PMT_Changed error here is what you do:
In Older Version of FlashTool
Load the scatter file
Click in Format (a new menu will popup)
Make sure that you select Format whole flash except bootloader then press OK
Connect your phone in bootmode (Turn off your device then hold Volume UP or VOLUME DOWN then insert USB)
It should detect your phone and continue to flash.
Then Click Download to fully flash your phone.
Hard Reset your phone after flashing.
In Latest version of Flashtool
Load the scatter file
Choose Format + Download (Underneath Scatter-loading file)
Then Click Download and wait until it is done flashing
For Invalid IMEI:
Your Phone/Tablet must be rooted first
Restore yong IMEI in MTKDroidTools version 2.5.3. You will have this error when you format your phone in Flashtool as I had experienced. To restore download MTKDroidTools version 2.5.3 After you extract the file. Open the green robot, you must enable the usb debugging in your phone. It is usually located in Settings>Devoloper Mode then look for usb debugging. After enabling it. Connect your phone in your computer then in MTKDroidTool click on ROOT. Wait for it to finish, then Click in IMEI/NVRAM, input 15 number in each box. Then click REPLACE. Then click Reboot or you can manually turn off your phone. Then turn your phone on again. You can see that you have fully restored your IMEI.
Don't Forget to like us on Facebook and Follow us on Google+
Some workarounds:
If you encounter PMT_Changed error here is what you do:
In Older Version of FlashTool
Load the scatter file
Click in Format (a new menu will popup)
Make sure that you select Format whole flash except bootloader then press OK
Connect your phone in bootmode (Turn off your device then hold Volume UP or VOLUME DOWN then insert USB)
It should detect your phone and continue to flash.
Then Click Download to fully flash your phone.
Hard Reset your phone after flashing.
In Latest version of Flashtool
Load the scatter file
Choose Format + Download (Underneath Scatter-loading file)
Then Click Download and wait until it is done flashing
For Invalid IMEI:
Your Phone/Tablet must be rooted first
Restore yong IMEI in MTKDroidTools version 2.5.3. You will have this error when you format your phone in Flashtool as I had experienced. To restore download MTKDroidTools version 2.5.3 After you extract the file. Open the green robot, you must enable the usb debugging in your phone. It is usually located in Settings>Devoloper Mode then look for usb debugging. After enabling it. Connect your phone in your computer then in MTKDroidTool click on ROOT. Wait for it to finish, then Click in IMEI/NVRAM, input 15 number in each box. Then click REPLACE. Then click Reboot or you can manually turn off your phone. Then turn your phone on again. You can see that you have fully restored your IMEI.
Don't Forget to like us on Facebook and Follow us on Google+
Cherry Mobile Pearl Firmware Download Link
You need this firmware/stock rom if you have encountered this kind of problem in your phone.Listed Below
1.Hang in logo
2.Rebooting
3.Bootloop
4.Dead Phone But detected in PC
1.Hang in logo
2.Rebooting
3.Bootloop
4.Dead Phone But detected in PC
Downloads:
VCom Drivers
Drivers Auto Installer
Sp Flash Tools
Sp Flash Tools
After finish downloading all files put in one folder in desktop to easily navigate the files.
If you using Window 7 OS
Connect your phone in PC using Micro USB Cable in turn-off mode and open Drivers Auto Installer and run the install-window batch file.Like shown in the image.
3. If the driver is successfully installed MediaTek DA USB VCOM will appear in the New Hardware Wizard.
Drivers Auto Installer
Sp Flash Tools
Sp Flash Tools
After finish downloading all files put in one folder in desktop to easily navigate the files.
Installing Drivers
First thing first,Before you can flash/install rom in your phone you must secure first that your phone is detected in your PC.If you using Window 7 OS
Connect your phone in PC using Micro USB Cable in turn-off mode and open Drivers Auto Installer and run the install-window batch file.Like shown in the image.
The drivers will automatically installed in your PC.
If You using Window XP
Connect your phone in PC using Micro USB Cable in turn-off mode while pressing Volume Up or Volume Down.This will detect and look for the driver.
1. This is the first time that you will connect your phone and it will search for the correct driver.
2. Check include this location ... ... and click on browse. Look for USB VCOM Driver and Click on 2K_XP_COM folder if you are using Windows XP or Win7 for Windows 7 and then press OK when you are done picking the right folder for the driver.
Flashing/Install new Firmware/Stock ROM
1.Open Sp Flash tool
2.Click Scatter-loading and browse for MT6572_Android_scatter
3.Now,Click Download and connect your phone while power off.
4.When successfully connected the progress bar will run and change it colors and wait until you dialog window saying Download Ok.
Some workarounds:
If you encounter PMT_Changed error here is what you do:
In Older Version of FlashTool
Load the scatter file
Click in Format (a new menu will popup)
Make sure that you select Format whole flash except bootloader then press OK
Connect your phone in bootmode (Turn off your device then hold Volume UP or VOLUME DOWN then insert USB)
It should detect your phone and continue to flash.
Then Click Download to fully flash your phone.
Hard Reset your phone after flashing.
In Latest version of Flashtool
Load the scatter file
Choose Format + Download (Underneath Scatter-loading file)
Then Click Download and wait until it is done flashing
For Invalid IMEI:
Your Phone/Tablet must be rooted first
Restore yong IMEI in MTKDroidTools version 2.5.3. You will have this error when you format your phone in Flashtool as I had experienced. To restore download MTKDroidTools version 2.5.3 After you extract the file. Open the green robot, you must enable the usb debugging in your phone. It is usually located in Settings>Devoloper Mode then look for usb debugging. After enabling it. Connect your phone in your computer then in MTKDroidTool click on ROOT. Wait for it to finish, then Click in IMEI/NVRAM, input 15 number in each box. Then click REPLACE. Then click Reboot or you can manually turn off your phone. Then turn your phone on again. You can see that you have fully restored your IMEI.
Don't Forget to like us on Facebook and Follow us on Google+
Some workarounds:
If you encounter PMT_Changed error here is what you do:
In Older Version of FlashTool
Load the scatter file
Click in Format (a new menu will popup)
Make sure that you select Format whole flash except bootloader then press OK
Connect your phone in bootmode (Turn off your device then hold Volume UP or VOLUME DOWN then insert USB)
It should detect your phone and continue to flash.
Then Click Download to fully flash your phone.
Hard Reset your phone after flashing.
In Latest version of Flashtool
Load the scatter file
Choose Format + Download (Underneath Scatter-loading file)
Then Click Download and wait until it is done flashing
For Invalid IMEI:
Your Phone/Tablet must be rooted first
Restore yong IMEI in MTKDroidTools version 2.5.3. You will have this error when you format your phone in Flashtool as I had experienced. To restore download MTKDroidTools version 2.5.3 After you extract the file. Open the green robot, you must enable the usb debugging in your phone. It is usually located in Settings>Devoloper Mode then look for usb debugging. After enabling it. Connect your phone in your computer then in MTKDroidTool click on ROOT. Wait for it to finish, then Click in IMEI/NVRAM, input 15 number in each box. Then click REPLACE. Then click Reboot or you can manually turn off your phone. Then turn your phone on again. You can see that you have fully restored your IMEI.
Don't Forget to like us on Facebook and Follow us on Google+
How To Flash My Phone Iceberg and How to Restore Unknown Baseband [Guide With Firmware]
 |
| MyPhone Iceberg |
How To Flash My Phone Iceberg and How to Restore Unknown Baseband
Requirements:
Drivers Download Here
USB Cable
PC/Laptop
Want to know the specs of this phone?Check Here>My Phone Iceberg Specs
Procedures:
PC/Laptop
Want to know the specs of this phone?Check Here>My Phone Iceberg Specs
Procedures:
1. Download All Files Above
2. After download,Put your file in One folder(Recommended Put in Desktop)Easy to find when you needed it.
3. Extract All Files
4. Install all drivers, Restart your PC
5. Open the SP Flash Tool folder and open SP flash tool application
6. Click “scatter-loading” button and Browse for MT6589_Android_scatter_emmc.txt and open it.
7. In SEC_RO select the file that you downloaded
8. Turn-OFF Iceberg. Connect USB Cable to PC
7. In SEC_RO select the file that you downloaded
8. Turn-OFF Iceberg. Connect USB Cable to PC
9. Click Download
10. Connect USB Cable to iceberg. Download will now start
11. It will take a while. When finish you can see a big green circle. Done. Remove your phone from the usb cord the and turn it on.
12. Once booted, go to settings>about phone>baseband. You must see MOLY.blah.. blah.. blah..
We Can Proceed to Rewrite/Restore the IMEI
1. Find your IMEI 1 at IMEI 2 at the Back of the Phone
2. Follow this link on How to rewrite IMEI for further steps: http://jasharycellshop.blogspot.com/2014/07/how-to-restore-imei-on-mtk-chips-using.html
Disclaimer:Always Do at your own risks
Cherry Mobile Bubble Firmware Download Link
Here's the firmware of Cherry Mobile Bubble which you can use to recover your Cherry Mobile Bubble to bootloop situation and white screen only.
Thanks to the owner of this firmware Myles Dela Paz of gsmsandwich for uploading this which i use to recover my Cherry Mobile Bubble in boot loop situation.
FIRMWARE
Password:CC24
FLASHER
Here's How to flash using Research Download
1.Open Research Download
2.Load Firmware (Follow on image)
3.Go to download setting->Backup->UNCHECK all in Backup NVitem-> press OK
4. Press the play button
5. Insert battery then hold Vol +..then insert usb
6. Wait until it shows Reset..DONE
That's It
Thanks to the owner of this firmware Myles Dela Paz of gsmsandwich for uploading this which i use to recover my Cherry Mobile Bubble in boot loop situation.
Download:
FIRMWARE
Password:CC24
FLASHER
Here's How to flash using Research Download
1.Open Research Download
4. Press the play button
5. Insert battery then hold Vol +..then insert usb
6. Wait until it shows Reset..DONE
That's It
How To Flash Samsung C3312R Champ
How To Flash Samsung C3312R Champ
Do flashing your phone if it is have problem like hang in logo,freezes and sometimes it will fix the dead boot problem.
We talked before about updating many Samsung Champ models, And this Guide will talk about the C3312 Champ Deluxe Duos. As this model comes with Infineon chip too, Then we are going to use FlashTool program to perform the update process.
It is an important notice to know that all the data on your phone's memory will be deleted after the update, So check your phone to see if you want to keep any data before moving to the update steps.
Files and Programs:
- Samsung C3312 Champ Deluxe Duos Firmware Package.
- FlashTool Program.
- USB Drivers for Samsung C3312.
After downloading the above files, Extract the zipped ones, And install the USB drivers on your PC, Then restart it.
Tools:
- Origrinal USB cable of Samsung C3312, Or any suitable one.
- A computer running Windows OS.
Samsung C3312 Champ Deluxe Duos Firmware Update Steps:
- Turn your Samsung C3312 off, And take out its battery, SIM cards, And memory card.
- From the flasher folder run FlashTool_E2.exe
- To Select the Firmware files from its extracted folder click on (...) button,You have to do so for each file.
- The selecting of firmware files must be in the below order:
- C3312xxxxx_psi.fls
- C3312xxxxx_slb.fls
- C3312xxxxx_BSY.fls
- C3312xxxxx_CDS.fls
- C3312Oxxxx_CSC.dffs
- Now Check these settings:
Custom Order (Must be checked).
Erases Calibration! : Select (Erase whole flash before download).
Baud Rate: 921600
Communication Driver: Infineon USB Driver.
- Now you can click on Next button, And a new window will appear.
- Click on Start USB1 button.
- Now you have to connect your Samsung C3312 to PC using the USB cable.
- There are more than one way to connect your phone, You can try any one of the following:
1- With the phone's battery in, Press Volume Down key then connect the USB cable to it.
2- With the phone's battery in, Press Home key then connect the USB cable to it.
3- Connect the USB cable to phone without battery, After it is detected you can insert the battery.
- After the FlashTool starts the update process you have to wait for some minutes.
- When the operation is done, You will see a Success word, And that means it was done right.
- Disconnect the USB cable from phone.
- With your Samsung C3312 Champ Deluxe Duos on, Do a full reset by this code *2767*3855#
- Now when your phone restart it will be ready for using with its new firmware.
All the credits goes to http://www.tsar3000.com/Joomla/ All files I used I downloaded it there and specially the procedures!
Lenovo A316i Firmware Download Link
Below is the direct download link of the firmware of Lenovo A316i.
The extracted folder contains firmware,drivers and flash tools.
Note:Your Phone should have at-least 50-70 percent of battery to complete the flashing process.
How To Flash Firmware using SP Flash Tools
1.Download and extract the stock firmware on your PC.(Recommended in desktop to easily navigation)
2.After extracting you will find the SP Flash Tool,Firmware and Drivers.
3.Install the USB Drivers(skip if the drivers already installed)
4.Open the SP Flash Tools and load the scatter files from the firmware folder.
5.Now,click on download button to begin the flashing process
6.Now,Connect your phone to the computer using USB Mini Cable,after connecting it Press Volume Down or Volume Up key,so that your computer will easily detect your phone.
7.Once the Flashing is complete,a green ring will appear.
8.Close the SP Flash tool on your computer and disconnect your phone from the computer.
9.Your phone now should be Powered and you can now use it normally!!!
That's It!!!!
The extracted folder contains firmware,drivers and flash tools.
Note:Your Phone should have at-least 50-70 percent of battery to complete the flashing process.
Download:
Lenovo A316i FirmwareHow To Flash Firmware using SP Flash Tools
1.Download and extract the stock firmware on your PC.(Recommended in desktop to easily navigation)
2.After extracting you will find the SP Flash Tool,Firmware and Drivers.
3.Install the USB Drivers(skip if the drivers already installed)
4.Open the SP Flash Tools and load the scatter files from the firmware folder.
5.Now,click on download button to begin the flashing process
6.Now,Connect your phone to the computer using USB Mini Cable,after connecting it Press Volume Down or Volume Up key,so that your computer will easily detect your phone.
7.Once the Flashing is complete,a green ring will appear.
8.Close the SP Flash tool on your computer and disconnect your phone from the computer.
9.Your phone now should be Powered and you can now use it normally!!!
That's It!!!!
SKK Mobile Charm V1.0 Firmware Download Link
Hello guys!!!
Below is the Download link of SKK Mobile Charm V1.0 firmware,which you can use to revive your SKK Mobile Charm V1.0.
Use this firmware to solve this following problem you may encounter in your SKK Mobile Charm V1.0 like hang in logo,hangs,freezes and especially dead boot.
First thing first,Download all files below and extract it in your folder in desktop to easily navigation.
Download
SKK Mobile Charm V1.0 FirmwareSP Flash Tools V5.1343.1
SP Flash Tools V5.1424.00
How To Flash
1.Open SP Flash Tools
2.Now,Load Scatter file that can be found in SKK Charm V1.0 folder
3.Now,Click on Download to begin flashing process
4.Now,this time connect your phone to USB Cable while pressing Volume Down or Volume Up.(Phone must be OFF)
5.Flashing now should start and if success you can see a dialog window Download Ok.
That's It!!!
Huawei Ascend Y220-U10 Firmware Download Link
Below is the direct download link of the firmware of Huawei Ascend Y220-U10.
The extracted folder contains firmware,drivers and flash tools.
Note:Your Phone should have at-least 50-70 percent of battery to complete the flashing process.
How To Flash Firmware using SP Flash Tools
1.Download and extract the stock firmware on your PC.(Recommended in desktop to easily navigation)
2.After extracting you will find the SP Flash Tool,Firmware and Drivers.
3.Install the USB Drivers(skip if the drivers already installed)
4.Open the SP Flash Tools and load the scatter files from the firmware folder.
5.Now,click on download button to begin the flashing process
6.Now,Connect your phone to the computer using USB Mini Cable,after connecting it Press Volume Down or Volume Up key,so that your computer will easily detect your phone.
7.Once the Flashing is complete,a green ring will appear.
8.Close the SP Flash tool on your computer and disconnect your phone from the computer.
9.Your phone now should be Powered and you can now use it normally!!!
That's It!!!!
The extracted folder contains firmware,drivers and flash tools.
Note:Your Phone should have at-least 50-70 percent of battery to complete the flashing process.
Download:
Huawei Ascend Y220-U10How To Flash Firmware using SP Flash Tools
1.Download and extract the stock firmware on your PC.(Recommended in desktop to easily navigation)
2.After extracting you will find the SP Flash Tool,Firmware and Drivers.
3.Install the USB Drivers(skip if the drivers already installed)
4.Open the SP Flash Tools and load the scatter files from the firmware folder.
5.Now,click on download button to begin the flashing process
6.Now,Connect your phone to the computer using USB Mini Cable,after connecting it Press Volume Down or Volume Up key,so that your computer will easily detect your phone.
7.Once the Flashing is complete,a green ring will appear.
8.Close the SP Flash tool on your computer and disconnect your phone from the computer.
9.Your phone now should be Powered and you can now use it normally!!!
That's It!!!!
Subscribe to:
Posts (Atom)